ACI/560 Wet to Wet Differential Pressure Transducers

Wet to Wet Differential Pressure Transducers
ACI/560 Series

Product Description:
The ACI/560 is a two or three-wire wet to wet differential pressure transmitter. Some of the most common applications include: Chiller and Boiler Systems, Pumps and Compressors, Refrigeration Systems, Environmental Control Systems, and Water Management Systems.
The transducer can be powered with either 24 VAC/VDC. Built for remote installation, the ACI/560 is a rugged unit housed in a splash proof, dust proof NEMA 4 enclosure. The ACI/560 is ideally suited for use with any harsh media, wet or dry, that is compatible with 300 Stainless Steel.
Outputs of 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC are available. The pressure, input port is a 1/8" NPT Female fitting. Each unit is approximately 5.12" long x 3.70" in width x 2.24" in depth and weighs approximately 16.01 ounces.
The ACI/560 pressure transducers are available in ranges from 0 to 3 PSI all the way up to 0 to 500 PSI. All units are accurate to +/- 1.00% of the full scale output. Please contact the factory if any other ranges are necessary.

Product Specifications:

Supply Voltage 24 VAC/VDC Operation Temp -25 to 70°C (13 to 158°F)
Supply Current 35 mA Compensated Temp. 0 to 50°C
Accuracy +/- 1.00% of full scale output Thermal Effects +/- 1% F.S.O. within compensated range
Repeatability and
Hysteresis +/- 0.15% F.S.O. Output Signal 4 to 20mA, 0 to 5 VDC or
0 to 10 VDC
Maximum Operating Humidity 90% RH, Non Condensing Over Pressure 2X F.S.O. or 700 PSI, whichever is less
Stability less than 1% F.S.O./year Process Fitting 1/8" NPT Female (Stainless)

Ordering Information:

ACI/561D [] []
Range Output
(1) 0 to 15 (5) 1 to 5 VDC
(2) 0 to 30 (6) 1 to 6 VDC
(3) 0 to 50 (10) 1 to 10 VDC
(4) 0 to 100 (20) 4 to 20mA
(5) 0 to 250
Example: ACI/560-(1)-(20) or ACI/560-(0 to 15)-(4 to 20mA)

Supply Voltage	24 VAC/VDC	Operation Temp	-25 to 70°C (13 to 158°F)
Supply Current	35 mA	Compensated Temp.	0 to 50°C
Accuracy	+/- 1.00% of full scale output	Thermal Effects	+/- 1% F.S.O. within compensated range
Repeatability and Hysteresis	+/- 0.15% F.S.O.	Output Signal	4 to 20mA, 0 to 5 VDC or 0 to 10 VDC
Maximum Operating Humidity	90% RH, Non Condensing	Over Pressure	2X F.S.O. or 700 PSI, whichever is less
Stability	less than 1% F.S.O./year	Process Fitting	1/8" NPT Female (Stainless)

ACI/561D	[]	[]
	Range	Output
	(1) 0 to 15	(5) 1 to 5 VDC
	(2) 0 to 30	(6) 1 to 6 VDC
	(3) 0 to 50	(10) 1 to 10 VDC
	(4) 0 to 100	(20) 4 to 20mA
	(5) 0 to 250