PowerSight 3000 Features

PowerSight 3000 Features and Functions

Diagnose Power Related Equipment Performance Problems

Analyze Harmonic Levels and Track Down Their Source

Diagnose Problems Caused by the Effects of Transients

Verify Cost Effectiveness of Energy Saving Programs Such as Lighting Retrofits or Automated Controls

Measure Power Factor

4 Voltage Inputs - A, B, C, and Neutral for single phase and three phase circuits.
100 Measurements Each Second - Answers to all common questions about electric power: present values, summaries, and estimates.
Monitor Demand, Harmonics, or Disturbances - Summary data available on the display, data log may be uploaded to a computer for display and analysis.
12 Voltage Measurements - Maximum, minimum, average, and present value for each phase-to phase, phase-to neutral, and DC voltage.
16 Current Measurements - Maximum, minimum, average, and present value for A, B, C, and Neutral currents.

True RMS, VA, and VAR Power - Maximum, minimum, average, total, and present value.

Duty Cycle - Average "On" Time – Power Cycles – Estimated power cycles per hour, per day, per week. Excellent diagnostic tool for thermostatically-controlled loads.

True Power Factor and Displacement Power Factor - Maximum, minimum, average, and present value of true power factor for A, B, C, and Total.

User Control of Administrative Settings - Change the time, date, greeting, etc.

Switch Between Families of Measurements - Phase to phase, phase-to-neutral, DC, variable frequency, fixed frequency, positive power, regenerative power.

Internal Battery to Bridge Power Failures - Internal rechargeable battery pack can stand alone or trickle charge while operating LED indicates that battery is charging.

4 Current Inputs - A, B, C, and Neutral for single phase and three phase circuits.

Transient/Swell/Sag Detection - Magnitude, duration, rise time, and time/date of worst transient. All swells and sags of at least 1 second in duration are recorded while monitoring consumption.

Harmonic Analysis of Any Voltage or Current - THD of any of the 3 voltages or 4 currents upon demand (through the 15^th on meter and through the 50^th with software). Magnitudes of individual harmonics (with Harmonic Analysis Option installed).

Elapsed KWH and True Cost - Actual energy use and cost are updated each second.

Estimated Energy and Cost Per Hour, Per Month, Per Year - Estimates are updated each second.

Peak Demand Period - Finds period and magnitude of peak demand. Length of demand period is under user control.

Real-Time Clock/Calendar - Present time and elapsed time of monitoring may be displayed at any time. Monitoring may be started or stepped at pre-set times.

Straightforward User Calibration - Calibrate voltage, current, and frequency if desired. Set input ratios for voltages and current for automatic compensation in all calculations.

User Control of Measurement Settings - Set logging interval from 1 second to 99 minutes. Set utility rate from $0.00001 to $999,999 per KWH for U.S. and international currencies.

Waveform Capture - Stores 14 synchronized voltage and current waveforms for later viewing.

A User Interface You Can Really Understand - Intuitive breakthrough puts the power of this instrument in the palm of your hand.

Serial Communications Port to Upload Waveforms, Data Log, and Remote Control - With PC Control/Analysis Option, waveforms and data logs can be uploaded upon demand. Multiple PowerSight units may be remotely controlled and interrogated from one computer.