|
 |
SO-975 Water Detection Sensor |
| Can be used with all Sensaphone models to detect the presence of water on
a horizontal surface. Independently powered by internal lithium batteries. Multiple
sensors can be wired in series to a single input. |
|
 |
SO-976 Tempº Alert |
Can be used with all Sensaphone models to monitor air temperature from
-30° to 130º F
(-34° to 54° C). When temperature exceeds the setting, the sensor
causes an alarm. Can be mounted to any wall or vertical surface. Multiple Tempº Alerts
may be wired in parallel to a single input. |
|
 |
SO-977 Heavy-Duty Water Detector |
| This heavy-duty water detector is externally powered for zero-battery
maintenance for those areas where you are detecting water often. Unit is adjustable for
measurement of liquid heights of up to 1.5". Unit is externally powered with 11 to 27
VAC or VDC, power supply not included. Includes onboard LED indication of power and
alarm status as well as SPDT contacts to provide either a Normally Open or Normally Closed
loop to your Sensaphone. This detector can be powered directly from your Express II
systems! |
|
 |
SO-980 & SO-981 Wall Mounted Temperature Sensors |
| Place your temperature sensors on the wall next to your thermostat.
Plastic enclosure attaches to drywall or wood with screws and includes wire terminals for
attachment to our Sensaphone systems. Comes in either 2.8k (for our 1104/1108 systems) or
the 10k (for our larger systems). Requires 18g to 24g wire for attachment to your
Sensaphone, sold separately. |
|
 |
SO-983 Humidistat |
| Can be used with all Sensaphone models to detect too high or too low
humidity level. Range of the humidistat is 10% to 60% RH. The sensor causes an alarm when
the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a
single input. |
|
 |
SO-984 Magnetic Reed Switch |
| May be used with all Sensaphone models to detect any unauthorized entry or
intrusion. Usually installed on doors and windows, the sensors monitor their opening and
closing. Several magnetic reed switches may be wired in series. |
|
 |
SO-986 Remote Temperature Sensor |
| Enables you to monitor temperature at a location away from your Sensaphone
unit. Measures and tells you the exact temperature and triggers an alarm when it exceeds
the set high/low limits. May be mounted anywhere air temperature needs to be measured and
can be used with all Sensaphone models. Range -20° to 150° F. |
|
 |
SO-987 Passive Infrared Motion Detector |
| Can be used with all Sensaphone models to monitor the movement of warm
bodies in a specific area. Will cause a dial out if motion is detected. Range of detection
covers approximately 50 ft. of area. Multiple sensors can be wired in series to a single
input. |
|
 |
SO-989 Slimline Temperature Sensor |
| Identical to SO-976 but thinner profile. Mechanical contacts,
non-reporting sensor. |
|
 |
SO-990 External Power Sensor |
| Used to add dual power-outage detection to all Sensaphones. Ideal for
monitoring UPS and external power. Your Sensaphone will call you if your UPS fails! |
|
 |
SO-991 Water Bug Console Sensor |
| Detects surface water. Comes with one detector and allows for up to 5
additional detectors attached to the same sensor. Either battery operated or by 14 VDC
power supply. Optional Under Carpet Sensor available separately. |
|
 |
SO-994 Float Switch |
| Detects rising or falling water levels. Great for basement pumps or tank
management. Sealed plastic magnetic reed switch construction ensures long life. |
|
 |
SO-999.50 & SO-999.100 Accessory Hook-Up Wire |
| Two conductor shielded sensor connection wire used to connect accessory
items to your Sensaphone. Appropriate for wiring all sensors available from TechPatrol.
Comes in either 50' or 100' lengths. |