Tripp Lite - SmartPro XL UPS

SmartPro XL UPS Systems

Expandable UPS protection for critical systems

Built to support heavy network loads, SmartPro XL UPS Systems provide extra runtime for critical UPS applications. Additional batteries may be connected to keep your system running for hours during a blackout.

FREE PowerAlert Software and complete cabling manage and upgrade every network UPS system
Multi-level automatic voltage regulation keeps servers working through low voltage (brownouts) and high voltage conditions without using battery power
RFI/EMI line noise filtering prevents interference (i.e. from motors, lights and radio transmissions) from affecting your computer
Up to three serial ports are included to provide management to multiple servers
Optional batteries may be connected to extend backup times

Extended-run models also available in DataCenter and Rackmount configurations.

Optional Battery Packs:

BP-24V33 (Extends runtimes of SmartPro 1250 XL, and 2200 XL)

Model	SmartPro 700 XL NET	SmartPro 1050 XL NET	SmartPro 1250 XL NET	SmartPro 2200 XL NET	SmartPro NET 2200 RM XL
Input/Output Voltage	120	120	120	120	120
Input/Output Hz	60	60	60	60	60
Output VA	700	1050	1250	2200	2200
Output Watts	425	705	900	1700	1700
UPS Type	Line Interactive	Line Interactive	Line Interactive	Line Interactive	Line Interactive
Online Waveform	Pure Sine	Pure Sine	Pure Sine	Pure Sine	Pure Sine
On Battery Waveform	PWM Sinusoidal	PWM Sinusoidal	PWM Sinusoidal	PWM Sinusoidal	PWM Sinusoidal
Voltage Regulation	Automatic voltage corrections back to nominal levels, boosting 87-110 volt input and reducing 125-140 volt input.	Automatic voltage corrections back to nominal levels, boosting 87-110 volt input and reducing 125-140 volt input.	Automatic voltage corrections back to nominal levels, boosting 87-110 volt input and reducing 125-140 volt input.	Automatic voltage corrections back to nominal levels, boosting 87-110 volt input and reducing 125-140 volt input.	Automatic voltage correction back to nominal levels, boosting 87-110 volt input and reducing 125-140 volt input.
Full Load Runtime (min.)	25	16	24+	11+	13+
1/2 Load Runtime (min.)	70	46	85+	28+	29+
Typical Runtime (min.)	up to 4 hours	up to 6 hours	up to 8 hours	up to 8 hours	up to 8 hours
Recharge Rate (hours)	2-4	2-4	2-4	2-4	2-4
Transfer time (ms.)	2-4	2-4	4-6	4-6	4-6
Joules	480	480	480	480	480
Maximum Surge Current (amps)	36,000	36,000	36,000	36,000	36,000
Suppression Response Time	0 ns. (instantaneous)	0 ns. (instantaneous)	0 ns. (instantaneous)	0 ns. (instantaneous)	0 ns. (instantaneous)
EMI/RFI Noise Reduction	Greater than 80 dB @ 1 MHz	Greater than 80 dB @ 1 MHz	Greater than 80 dB @ 1 MHz	Greater than 80 dB @ 1 MHz	Greater than 80 dB @ 1 MHz
High Volt Switch to Battery	140	140	140	140	140
Low Volt Switch to Battery	87	87	87	87	87
Outlet Type (f)	8 NEMA 5-15R	8 NEMA 5-15R	6 NEMA 5-15R	6 NEMA 5-15R	6 NEMA 5-15R + 2 NEMA 5-20R
Cord Length	6 ft.	6 ft.	6 ft.	8 ft.	12 ft.
Plug Type (m)	NEMA 5-15P	NEMA 5-15P	NEMA 5-15P	NEMA 5-20P	NEMA 5-20P
Dimensions HxWxD (inches)	16 x 5.25 x 10.5	16 x 65.25 x 10.5	16.25 x 9 x 12.5	16.25 X 9 x 12.75	7 x 14.75 x 17.75 Fits standard 19 inch rack. Uses 4 rack spaces.
Shipping Weight (lb.)	49	49	81	91	104
Fax/Modem Surge Protection	Not included. Order add-on module #DTEL2	Set of RJ11 jacks protects a single phone line	Not included. Order add-on module #DTEL2	Not included. Order add-on module #DTEL2	Not included. Order add-on module #DTEL2
Network Interface Port	2 Built in DB9 SMART communications ports for use with bundled PowerAlert software and cabling.	2 Built in DB9 SMART communications ports for use with bundled PowerAlert software and cabling.	3 Built-in DB9 SMART communications ports for use with bundled PowerAlert software and cabling.	3 Built-in DB9 SMART communications ports for use with bundled PowerAlert software and cabling.	3 Built-in DB9 SMART communications ports for use with bundled PowerAlert software and cabling.
Software and Cable Included	Includes PowerAlert Plus Software and 2 monitoring cables	Includes PowerAlert Plus Software and 2 monitoring cables	Includes PowerAlert Plus Software and 3 monitoring cables	Includes PowerAlert Plus Software and 3 monitoring cables	Includes PowerAlert Plus Software and 3 monitoring cables
Product Warranty (yr.)	2	2	2	2	2
Ultimate Lifetime Insurance	$50,000	$50,000	$50,000	$50,000	$50,000
Battery Access	Technician	Technician	Technician	Technician	Access door allows user replaceable, hot swappable access of UPS batteries
Controls, Indicators, and Additional Features	On/off, battery test switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational status, voltage input correction activity, battery and battery charger status, and load level. Audible alarms.	On/off, battery test switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational status, voltage input correction activity, battery and battery charger status, and load level. Audible alarms.	On/off, battery test switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational status, voltage input correction activity, battery and battery charger status, and load level. Audible alarms.	On/off, battery test switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational status, voltage input correction activity, battery and battery charger status, and load level. Audible alarms.	Includes system on/off and battery test switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational status, voltage input correction activity, battery and battery charger status, load level, and audible alarms.